Algorithms generate maps Lurid X Studio™ delivers answers

Keep your mapping software. Add volumes checked against it, a report your client can read and a hub under your company's name.

Worked example, Sand pile 1: the volume between the surface model and a base plane fitted along the pile's outline, summed on a 0.25-ft grid, comes to 22,207 cubic feet, or 822.48 cubic yards. Set beside DroneDeploy's 834.89 cubic yards it is off by −1.49 %, inside the ±2 % check.
834.89 cu ydSand pile 1 · net volume above a plane fitted along its outline
Off by −1.49 %Recomputed from the surface model: 822.48, set beside DroneDeploy's 834.89. Within ±2 %.
EPSG 6407 · feetNAD83(2011) / Arizona East and NAVD88 heights, read from the file itself.

Sample figures: the Sand & Gravel yard in Safford, flight of September 6, 2026 (report LX-20260906-02).

From $39 a flight · No contract · Cancel anytimeGet notified

Get the highlights.

1 of 6

Drop the folder

One folder in. Every file sorted.

Studio reads inside each export — what it is, its coordinate system, its height unit — and leaves out what the job does not need.

DroneDeploy export
Arizona East · feet

Any platform

Your software, your exports.

DroneDeploy, Pix4D, Propeller, WebODM, DJI Terra and Metashape. Outlines as GeoJSON, KML, shapefile, DXF, GeoPackage or CSV.

7 programs
7 formats

Every figure cited

A number with its method.

Each volume says what it was measured on, the base beneath it and the standard it follows, right on the page.

Base: linear fit
through the corners

Off by, plus or minus

Checked before it goes out.

Set beside your software's own figure for the same outline. Anything outside your tolerance is flagged for you, not your client.

Off by
−1.49 %

Read at a glance

A first page anyone can read.

Page one answers in plain words. The pages after it hold every detail, with the 3D model and the files alongside.

Page one for anyone.
Every detail after.

Your client hub

Your name on it. Your clients in it.

Every flight in one hub under your company's name. Share any map with as many people as you like; they see what you shared, and nothing else.

1 hub
every flight

How it works

Drop. Check.
Deliver.

01

Drop the export folder.

The whole folder from DroneDeploy, Pix4D, Propeller, WebODM, DJI Terra or Metashape. Studio reads each file, sorts it, finds the date flown and skips what the job doesn't need.

02

Studio measures and checks.

Volumes computed from your surface model, then set beside your software's own figures. Anything outside your tolerance is flagged before it reaches a client.

03

Hand over the answer.

A report you can read at a glance or explore in depth, every figure cited, with the 3D model and the files for your client's own software.

Try it on a sample flight →

Show your work

Every number shows its work.

Nothing on the report is a black box. Pick any part of a figure and see where it came from: the surface it was measured on, the base beneath it and what it was checked against.

The work, by the numbers.

7

mapping programs' exports read as they come

7

outline formats: GeoJSON, KML, KMZ, shapefile, DXF, GeoPackage, CSV

1

folder to drop — no forms, no coordinate system to pick

±2 %

every pile's volume checked against your software's, or flagged

Keep your platform.
Add the answers.

Your mapping software does the basics well. Lurid X Studio™ adds the details: verified volumes, a report a client can read, and a record of how every number was made.

  • DroneDeploy
  • Pix4D
  • Propeller
  • WebODM
  • DJI Terra
  • Agisoft Metashape
  • Works with these programs' exports. Lurid X is not affiliated with or endorsed by their makers.

Your client hub

Your name on top.
Your clients inside.

Every subscriber gets one hub for all of his flights, under his own company's name. Share any flight or map with as many people as you like — they see the figures, the 3D model and the report you shared, and nothing else.

Sample Mapping Co.Powered by Lurid X Studio™
You · owner

Projects 3 projects · 3 clients

Stockpile VolumetricsSand & Gravel yard · weekly · latest flight Sept 6, 2026
1,991 cu yd on hand
North PitPit operator · site map
41.86 acres
Riverview TrailTrail association · trail map
7,498 ft
Invitedmanager@example.com → Sand & Gravel yardoffice@example.com → Sand & Gravel yardsuper@example.com → Pit operator

You see every client, every project and everyone you've invited.

Open the sample hub →

Your brand on every page.

Your company's name and logo across the top, in your color. “Powered by Lurid X Studio™” sits underneath in small type.

Share with anyone.

Share a whole project or a single flight, with as many people as you like. Each one signs in with a link and sees only what you shared. Remove someone in one click.

Every flight on file.

Each flight you publish joins the record: the figures, the change since last time, the report and the 3D model, in order.

Ask for a feature.

Want something on your hub — tons as well as cubic yards, a new chart, a page for one client? Ask. If we can build it, you get it, in your plan, switched on for your hub. Lurid X keeps the rights to what it builds.

Pricing

No contract.
Cancel anytime.

Priced by the flight — everything captured at one site on one day, however many batteries it took. Sites, projects, maps and the people you share with don't count.

Pay per flight

$39a flight

No monthly fee. For the odd job, and for trying it out.

Most popular

Up to 10 flights a month

$149a month

Or $1,490 for the year, paid up front: two months free.

Extra flights: off unless you turn them on — then $29 each.

11 to 20 flights a month

$249a month

Or $2,490 for the year, paid up front: two months free.

Extra flights: off unless you turn them on — then $19 each.

More than 20 flights a month

Customquote

Flying more than 20 a month? Tell us about your sites and we'll build a plan around them.

Request a quote Or call 602-639-1700

Request a custom quote

For more than 20 flights a month. Your request goes straight to Bill at Lurid X, who will reply by e-mail. Prefer to talk? Call 602-639-1700.

We use your details only to answer this request.

You're in control of extra flights.

Extra flights are off unless you turn them on. With them off, Lurid X Studio™ stops processing new flights when you reach your plan's limit and starts again when your month resets — no surprise charges. Re-runs and edits of flights you've already processed keep working.

Turn extra flights on any time, and off again: $29 each on the 10-flight plan, never more in a month than the 11-to-20 plan costs, and $19 each on the 11-to-20 plan.

In every plan

  • Unlimited customization. Re-run and edit any flight as often as you like, free.
  • Your own client hub — every flight in one place, under your company's name.
  • Share any flight or map with as many people as you like.
  • Custom features on your hub, on request. If we can build it, you get it. Lurid X keeps the rights to what it builds.
  • Exports from DroneDeploy, Pix4D, Propeller, WebODM, DJI Terra and Metashape.
  • Feet by default — or yards, meters, inches and centimeters, on every screen.
  • No contract. Cancel anytime, online, the same way you signed up.
5
Your best fit
Up to 10 flights
$149 a month

Be first in line.

One e-mail when Lurid X Studio™ opens to subscribers. Nothing else.