Friday, November 6

Drop a flight.

The export folder from your mapping software. Studio sorts the files, reads the date flown and starts the work.

Drop a folder here to try it

Use a real export folder from DroneDeploy, Pix4D, Propeller, WebODM, DJI Terra or Metashape. The real sorting runs here in your browser on the first few kilobytes of each file. Nothing is uploaded.

Sample folder

Sand & Gravel yard

flown Sep 6 at 11:33 AM (read from the map files) · flight 10

Read from the files DroneDeploy export · NAD83(2011) / Arizona East (EPSG:6407) · heights in feet, NAVD88 (GEOID18)

Left out: the point cloud and the 3D model (not needed for the job)

4 files · the job starts when they are in

Your projects.

Your client hub →New project →

This month: 1 of 10 flights · Up to 10 flights plan · re-runs don't count · your month resets Dec 1

Extra flights: off. At 10 flights, new flights wait until your month resets — no extra charges.
Stockpile volumesReady to check

Sand & Gravel yard

1,991.35 cu yd Flight 10 · 5 piles · 3 to review against DroneDeploy
Site mapProcessing 64%

North Pit

41.86 acres Area mapped · contours every 1 ft · 3D site model
Trail mapIn the client hub

Riverview Trail

7,498 ft +186 ft climb · moderate · 3D trail page

Sample workspace. Sand & Gravel yard figures are from the Sample Client hub (report LX-20260906-02); North Pit and Riverview Trail are example projects. The workspace is the pilot's own; his clients see only what he publishes to his client hub.